Ways of improvement of technological equipment performance
https://doi.org/10.21323/2414-438X-2021-6-1-87-96
Аннотация
Increasing of production performance of production systems and equipment in the meat-processing industry is integrally linked to maintenance activities. The article analyzes the influence of technological effectiveness, level of hygiene, reliability and simplicity of equipment design on the main parameters of meat products quality. Here it is shown that the strategy of Total Productive Maintenance (TRM) and Lean production is important tool for assessment of parameter of the Overall Equipment Effectiveness (OEE), which is used to assess the main types of losses that reduce the equipment productivity. The link of influence between the structural and mechanical properties of food masses, the moisture content of the initial food raw material, the temperature and viscosity, the processing pressure, and the density for the optimal operating terms of the equipment are analyzed in this research. With the help of OEE concept, the time losses related to the features of the equipment functioning are determined. The types of losses are classified as follows: downtime and readjustment (availability or readiness for operation) of equipment, short-term shutdown of equipment and a decrease in processing speed (productivity or performance rate of the equipment), product rejects and product losses (quality losses) during startup of equipment. While analyzing of the operation of vacuum filler for sausages production, the values of parameters of equipment availability, it productivity and product quality are calculated. The availability index is 0.79, the productivity index is 0.76, and the product quality index is 0.95. Taking into account the obtained data on equipment availability, productivity and product quality, it is determined that the overall equipment effectiveness (OEE) accounts for 57%. The application of this method for studying the overall equipment effectiveness operation can be applied to any technological equipment used in the meat-processing industry and allows eliminating many problems that arise during the operation of technological equipment, improving its technical and economic parameters, and developing a system of measures for improvement of its maintenance and repair.
Список литературы
1. Allard Droste, A. (2007). Lean thinking, banish waste and create wealth in your corporation. Action Learning: Research and Practice, 4(1), 105–106. https://doi.org/10.1080/14767330701233988
2. Kuzlyakina, Yu.A., Nikitina, M.A. (2019). Development con cept of lean production in Russia and abroad. Vsyo o myase, 6, 22–26. https://doi.org/10.21323/2071–2499–2019–6–22–26 (In Russian)
3. Nikitina, M.A. (2019). Lean technologies in Russian and foreign enterprises. Meat Industry, 6. 8–10. (In Russian)
4. Ihueze, C.C., U-Dominic, C.M. (2017). Maximizing overall equipment effectiveness in a food processing industry: a case study. Archives of Current Research International, 11(4), 1–10. https://doi.org/10.9734/acri/2017/38187
5. Choubey, A. (2012). Study the initiation steps of Total Pro ductive Maintenance in an organization and its effect in improvement of overall equipment effectiveness. International Journal of Engineering Research and Application, 2(4), 1709–1713.
6. Afefy, I. H. (2014). Implementation of total productive maintenance and overall equipment effectiveness evaluation. International Journal of Mechanical & Mechatronics Engineering, 13(1), 60–75.
7. Sharma, A. K., Bhardwaj, A. (2012). Manufacturing performance and evolution of TPM. International Journal of Engineering Science and Technology, 4(3), 854–866.
8. Aleš, Z., Pavlů, J., Legát, V., Mošna, F., Jurča, V. (2019). Methodology of overall equipment effectiveness calculation in the context of industry 4.0 environment. Eksploatacja i Niezawodnosc, 21(3), 411–418. https://doi.org/10.17531/ein.2019.3.7
9. Tsarouhas, P. (2007). Implementation of total productive maintenance in food industry: a case study. Journal of Quality in Maintenance Engineering, 13(1), 5–18. https://doi. org/10.1108/13552510710735087
10. Talib, F., Rahman, Z., Qureshi, M.N. (2010). Pareto analysis of total quality management factors critical to success for service industries. International Journal for Quality Research, 4(2), 155–168.
11. Powell, T., Sammut-Bonnici, T. (2015). Pareto analysis. Chapter in a book: Wiley Encyclopedia of Management. Publisher: John Wiley & Sons. Project: Wiley Encyclopedia of Management. Vol 12 Strategic Management. 2015. • ISBN: 978–1–119–97251–8
12. Kume, H. (1985). Statistical methods for quality improvement. Tokyo: Association for Overseas Technical Scholarship
13. Netes, V.A. (2000, April 9–12). Pareto analysis approach to reliability improvement. 2d International Workshop on the Design of Reliable Communication Networks (DRCN2000). Munchen. 187–191.
14. Peleev, A.I. (1971). Technological equipment of meat industry enterprises. Moscow: Food industry. 1971. — 519 p. (In Russian)
15. Smirnov, M. B., Abdilova, G. B., Manapova, D.T. (2019). Equipment for forming food masses: An analytical review. Semey: «Pro 100print». 2019. — 81 p. (In Russian)
16. Kudryashov, L.S. (2018). Defects and the ways of their elimination in cooked sausage production. Meat Industry, 30–33. (In Russian)
17. Lisitsyn, A.B., Nikitina, M.A., Zakharov, A.N., Sus, E.B., Nasonova, V.V., Lebedeva, L.I. (2016). Prediction of meat product quality by the mathematical programming methods. Theory and practice of meat processing, 1(1), 75–90. https://doi. org/10.21323/2414–438X 2016–1–1–75–90 (In Russian)
18. Kosoy, V.D. (1983). Improving the production process of cooked sausages. Moscow: Light and food industry. 1983. — 272 p. (In Russian)
19. Gorbatov, A.V. (1984). Rheology of meat and dairy products. Moscow: Light and food industry. 1979. — 384 p. (In Russian)
20. Gorbatov, A.V., Maslov, A. M. Machikhin, Yu.A. (1982). Structural and mechanical properties of food products. Moscow: Light and food industry. 1982. — 296 p. (In Russian)
21. Smirnov, M. B., Manapova, D.T., Abdilova, G. B. (2019). Graphoanalytical method of determining the viscosity of sausage forcemeats. Bulletin of the Shakarim State University of Semey, 4(88), 86–90.
22. Machikhin, Yu.A. (1990). Rheometry of food raw materials and products: A reference book. Moscow: Agropromizdat. 1990. — 271 p. (In Russian)
23. Schramm, G. (1994). A practical approach to rheology and rheometry. Karlsruhe: Gebrueder Haake GmbH. 1994. — 291 p.
24. Gorbatov, V.M., Gorbatov, A.V., Smirnov, M.B. (1983). Diagrams of velocities and deformations during non-isothermal flow of minced meat through tubes. Proceedings of the XXIX European Congress of Meat Industry Scientists. Italy, Room. 301–312.
25. Productivity Press Development Team. (1999). OEE for Operators: Overall Equipment Effectiveness. Taylor & Francis, 1999. — 63 p. ISBN9781563272219
26. Smirnov, M., Abdilova, G., (2020). Evaluation of the effectiveness of technological equipment. Vsyo o myase,, 5S, 337–339. https://doi. org/10.21323/2071–2499–2020–5S 337–339 (in Russian)
Рецензия
Для цитирования:
, . Теория и практика переработки мяса. 2021;6(1):87-96. https://doi.org/10.21323/2414-438X-2021-6-1-87-96
For citation:
Smirnov M.B., Abdilova G.B. Ways of improvement of technological equipment performance. Theory and practice of meat processing. 2021;6(1):87-96. https://doi.org/10.21323/2414-438X-2021-6-1-87-96
Просмотров:
785
Послать статью по эл. почте 